Vervale boats

[adee]

Hi! I have Just taken ownership of a verl 900 does anybody know of an owners association of verlvale boats.thanks

<hr width=100% size=1>

 

[ickyman]

Hi, just found your post on the Verl 900 I am building a new one at present and hope to have it on the water next easter. Perhaps we could help on another with problems etc. - excellent boat almost bought one new from Verlvale after a sail at the Southampton boat show in the late 70's - moulds for a new one are now owned by Maurice Huffy of Blaxton Boats near Doncaster - super guy and would go out of his way to help you with any locker, anchor locker lids etc that you might need replacing. - e-mail me if you wish to talk!

<hr width=100% size=1>

 

[adee]

thank you for your reply but your email address does not come up?and thank.you for the info on the boatbuilder who has the moulds.I do think this is a very uderestimated boat. It has the best underwater shape i have seen may be i am biased.my boat was built in 1981 and was 2nd in her class in the round the island in 1983 and 3rd in 1984.i bought her this year the previous owner had her for 19 years.i would like to talk by email i am very inetrested in your project .how many off the verls has the boat builder sold.

<hr width=100% size=1>

 

[Cloudhowe]

I also have a Verl...a Verl 27. I find it nearly impossible to obtain information.

Perhaps we can all keep in touch??

/i

<hr width=100% size=1>

 

[adee]

A very good boat. the more info the better. regards

<hr width=100% size=1>

 

[ickyman]

Hi there my e-mail address is wgharmsworth@btopenworld.com - look forward to hearing from you, will send you some pictures of the interior layout of my boat as she is at the moment if you send me a e-mail address. My layout is different to early Verls in that the heads are to port of the companionway with chart table and aft cabin is to starboard plus the new boats now have a complete grp moulding for the headlining down to the deck along with a grp moulding for the heads compartment.

William Gale Harmsworth

<hr width=100% size=1>