BobE
Well-Known Member
I know that this might not be the place to post this but I'm now at my wit's end so.....
Here goes
My website is http://myweb.tiscali.co.uk/regertonssite/BobsHomePage.htm
I have installed a Netgear ASDL 2+ Modem router model DG 834 N.
I have always used WS_FTP pro to upload to the above site with out any problems...
And loaded to the address ftp://ftp.myweb.tiscali.co.uk/ .
Since installing the Netgear router I now get the following error report..
Can anyone help or advise?
QUOTE
Can't establish a RAS connection. A connection to the remote computer could
not be established because the modem was not found or was busy. For further
assistance, click More Info or search Help and Support Center for this error
number.
UNQUOTE
There is no error number shown on the report and of course I haven't a clue what a "RAS connection" is….
IE explorer and Outlook Express work fine from both this PC (through an
Ethernet cable) and the Laptop by remote wireless link.
I've looked at the Netgear site and their FAQs and cannot find a specific answer to the "uploading" problem. (Plenty on not being able to get on line though!)
I've contacted my ISPs help/support desk and they're telling me to unload the Router and reinstall the modem and it's driver….
This scares me whatsitless; I had a long period when I couldn't get emails or surf when I first installed the router so want to avoid this happening again if at all possible.
It seems to me that the router probably has a firewall and that this firewall is stopping WS_FTP from getting through to my site…
I'd even shut the Firewall for the short time I'm uploading...If I knew how!
Any ideas in simple terms and monosybillic words would be much appreciated..
Thanks in Advance Bob E...
Here goes
My website is http://myweb.tiscali.co.uk/regertonssite/BobsHomePage.htm
I have installed a Netgear ASDL 2+ Modem router model DG 834 N.
I have always used WS_FTP pro to upload to the above site with out any problems...
And loaded to the address ftp://ftp.myweb.tiscali.co.uk/ .
Since installing the Netgear router I now get the following error report..
Can anyone help or advise?
QUOTE
Can't establish a RAS connection. A connection to the remote computer could
not be established because the modem was not found or was busy. For further
assistance, click More Info or search Help and Support Center for this error
number.
UNQUOTE
There is no error number shown on the report and of course I haven't a clue what a "RAS connection" is….
IE explorer and Outlook Express work fine from both this PC (through an
Ethernet cable) and the Laptop by remote wireless link.
I've looked at the Netgear site and their FAQs and cannot find a specific answer to the "uploading" problem. (Plenty on not being able to get on line though!)
I've contacted my ISPs help/support desk and they're telling me to unload the Router and reinstall the modem and it's driver….
This scares me whatsitless; I had a long period when I couldn't get emails or surf when I first installed the router so want to avoid this happening again if at all possible.
It seems to me that the router probably has a firewall and that this firewall is stopping WS_FTP from getting through to my site…
I'd even shut the Firewall for the short time I'm uploading...If I knew how!
Any ideas in simple terms and monosybillic words would be much appreciated..
Thanks in Advance Bob E...