Bouba
Well-Known Member
It is a pain when you can see both ends of a pipe…but not the middleBe careful to install it in the breather and not in the pimp out line.
It is a pain when you can see both ends of a pipe…but not the middleBe careful to install it in the breather and not in the pimp out line.
Not exactly royalty…although I do have a certain sway with the mods and management…and they do tend to run things by me before making a decision….but not royalty….hardly more than nobilityAs YBW Royalty, I am surprised that you even shit, never mind smelly shit.
2" pvc union cost less than a tenner - 1kg pellets which will last a few seasons again around a tennerOk…just ordered the filter…should arrive next week…€42.90
For that price it is not worth making my own
I was reading another thread....where someone was trying to get to the rear of the calorifier .....and I thought, if I had to get to the back of mine...it would be engine and fuel tank outEngine out job…..need to replace the tank to do a proper job
I know it would be cheaper....just not cheap enough to pay for my time and effort. Some jobs aren’t worth doing.....a Dometic at €128 is a different story.....2" pvc union cost less than a tenner - 1kg pellets which will last a few seasons again around a tenner
We had notification yesterday that the ministry for infrastructure and water management have dropped the requirement to have the outflow from the heads closed and locked off, it was due to come in to force on 1 Jan 2026 and those of us with older boats were having to look for black water holding tanks, now we have a bit more time to find a solution.Engine out job…..need to replace the tank to do a proper job
Got ya - and yes if its not worth the time then dont waste the time - however if the cost outweighs then worth doingI know it would be cheaper....just not cheap enough to pay for my time and effort. Some jobs aren’t worth doing.....a Dometic at €128 is a different story.....
You make it sound as if he’s renting his heads for nefarious purposes. Or maybe porpoises.Be careful to install it in the breather and not in the pimp out line.
We had notification yesterday that the ministry for infrastructure and water management have dropped the requirement to have the outflow from the heads closed and locked off, it was due to come in to force on 1 Jan 2026 and those of us with older boats were having to look for black water holding tanks, now we have a bit more time to find a solution.

I hope that there are enough pump out locations for everyone to use.We had notification yesterday that the ministry for infrastructure and water management have dropped the requirement to have the outflow from the heads closed and locked off, it was due to come in to force on 1 Jan 2026 and those of us with older boats were having to look for black water holding tanks, now we have a bit more time to find a solution.
And if in the S of France, it’s vital to get there before Bouba does.I hope that there are enough pump out locations for everyone to use.