Soda blasting company in Essex?

[FullCircle]

Need to remove antifouling from Full Circle in preparation for Coppercoat in may.

Anyone recommend someone who can do that down in Rochford?

Anyone else who is thinking of doing something similar perhaps we can get together for a decent price discount?

I can get a really good rate for lift out/in and blast/chock/storage charges are also very reasonable.

 

[Cantata]

Jim, I used ARC, http://www.arccompany.co.uk/. Not sure they used soda, not sure what it was actually but they did a good job for me and for another in the yard the following winter.
They are Hamble-based but have (or had then anyway) a team in East Anglia, based near Stansted. Cost was a lot less than some.

 

[Otter]

Does it have to be soda? Slurry was £400 for full hull for LK last spring, the finish was perfect.

 

[Habebty]

Does it have to be soda? Slurry was £400 for full hull for LK last spring, the finish was perfect.

Who did you get to do it, I need a good blast!

 

[CliveG]

Hi Jim

I would be very intrested in joining you to get a better deal for the lift out. blasting and coppercoat.

Clive

 

[Otter]

Who did you get to do it, I need a good blast!

Granary Yacht Harbour

 

[DanTribe]

Glen Opie, Blastit Ltd in Little Baddow is knowledgeable and has been recommended.
I've not used him on yachts but has done heritage building stuff for my employers.
Not one of life's high pressure salesmen and office work takes second place to site work.

 

[Athene V30]

I had Karouise stripped last Sept. Cost was £405 for 27' LOA. David Kemp from Stansted. If interested will PM you his email and mobile.

 

[FullCircle]

I had Karouise stripped last Sept. Cost was £405 for 27' LOA. David Kemp from Stansted. If interested will PM you his email and mobile.

Thanks Peter - I already spoke to him today.

 

[FullCircle]

Granary Yacht Harbour

Quanta Costa Senor?

 

[MoodySabre]

These people are in Manningtree http://www.mpsodablasting.co.uk/

 

[Otter]

Quanta Costa Senor?

£40 per metre inc.

 

[Ianqv]

Evening Chief,
I hear there is some bloke at Bradwell who is pretty handy with a scraper! However, it's taken him 6 weekends to do 37ft! But what a magnificent job he has done!

Regards

Ian

 

[Andy61]

I'm having my hull Coppercoated over this winter by Halls at Walton. I made enqs about soda blasting as did the yard but we couldn't get a cost, all we could get was £40 per hour and no indication as to how long it would take. Halls have scraped my hull and then sanded/polished it super smoooth and when the weather warms up will apply the coppercoat. They have stripped the iron keel and treated it with a grey antirust paint. Halls are Coppercoat approved applicators. I use one of their moorings and over winter in their yard and am a satisfied customer.

 

[Simonpk]

I have just had a quote of £360.00 all in, for my 24' fin keel.