rosiefree
New Member
Does anyone no of a reasonable rigging service in the Essex area. i need the rigging checked on my centaur which is ashore at Leigh on sea.
Rigging service
- Thread starter rosiefree
- Start date
oldgit
Well-Known Member
Hi,Rosie and welcome to the forums,you will need to post this on one of the dedicated sailing forums perhaps (PBO) to get a sensible answer to your question.Mainly stinkers on here due to bridges getting in the way of masts etc on upper bit of river.
There are many sailing east coasters over on PBO well able to give you answers and assistance with your question.However do come back and see us here as all types of Thames users are welcome.I boat just across the estuary on the hallowed waters of the Medway.
Last edited:
Brayman
Well-Known Member
Shallowed indeed!
ianc1200
Well-Known Member
Try on the East Coast Forum; you'll get several recommendations. I use TS Rigging at Maldon, very good when they've done work for my boat in the Blackwater.
IanC
IanC
oldgit
Well-Known Member
We WILL be counting the spoons !(and probably the fenders as well)
Haa....... might have read this .....had I not been down at my V.posh clubhouse enjoying a G&T while deciding on what to have from the extensive menu.
Are you also aware that a certain BCC member and "Hardy" owner is slumming it at RCC this weekend. He has been told to bring his own bib and spoon and to stay away from the silverware,both cutlery and trophies.
Haa....... might have read this .....had I not been down at my V.posh clubhouse enjoying a G&T while deciding on what to have from the extensive menu.
Are you also aware that a certain BCC member and "Hardy" owner is slumming it at RCC this weekend. He has been told to bring his own bib and spoon and to stay away from the silverware,both cutlery and trophies.
Last edited:
bluemerlin
Member
Rigging
TS Rigging at Maldon - highly recommended - did an excellent and rapid job this winter. The job eventually cost less than the estimate! Jim Dines is brilliant.
TS Rigging at Maldon - highly recommended - did an excellent and rapid job this winter. The job eventually cost less than the estimate! Jim Dines is brilliant.
Brayman
Well-Known Member
Haa....... might have read this .....had I not been down at my V.posh clubhouse enjoying a G&T while deciding on what to have from the extensive menu.
Are you also aware that a certain BCC member and "Hardy" owner is slumming it at RCC this weekend. He has been told to bring his own bib and spoon and to stay away from the silverware,both cutlery and trophies.
So, he'd rather slum it at RCC than support his own club in the grand skittles challenge against Harleyford Motor Yacht Club?
boatone
Well-Known Member
Are you also aware that a certain BCC member and "Hardy" owner is slumming it at RCC this weekend. He has been told to bring his own bib and spoon and to stay away from the silverware,both cutlery and trophies.
Sunday best rig all arranged
apollo
...
You go and enjoy yourself, have a great time!!
Do you speak Essex?
Do you speak Essex?
oldgit
Well-Known Member
ESSEX.............How dare yoo..............its Chatham innit !
Hope he has ironed his shell suit and put on his best trainers ?
