Dmc
New member
I have a couple of redundant skin fittings that I would like proffesionally glassed in .are there any grp specialists that cover ripon area
For things involving hull integrity, I always get a professional with insurance. It's a small job so not expensive, but peace of mind.
Are they above the waterline?I have a couple of redundant skin fittings that I would like proffesionally glassed in .are there any grp specialists that cover ripon area
Try MSDS Dinghy Services at Hampsthwaite.I have a couple of redundant skin fittings that I would like proffesionally glassed in .are there any grp specialists that cover ripon area
Pretty much what I did but just kept the old skin fittings, one plastic, one bronze.What I did with mine (I had 2 redundant ones), is as follows:-
I bought 2 Trudesign skin fittings and a tub of Isopon P40.
I filled the skin fittings with P40.
The then fitted them to the boat (gobbed in with Sika).
I then bought and fitted blanking plugs on the inside of both (gobbed in with Sika) for good measure.
Total cost was about £20, and took me about an hour to do.
It also means that if I ever decide that I want to re-install the toilet, all I have to do is replace the filled skin fittings.