Halo
Reaction score
313

Latest activity Postings About

    • Halo
      When I did this I went into Goole and dropped the mast then motored up to York. There is a swing bridge where the railway crosses the...
    • Halo
      Halo replied to the thread Messing about with acid.
      If you didn’t rinse out the engine I would do it soon. The price of doing anything is that you will occasionally mess up. At least you...
    • Halo
      Halo replied to the thread Prop cleaning.
      Brick cleaner. (It’s dilute hydrochloric acid). Just rinse it off well and wear p p e especially over eyes
    • Halo
      Halo replied to the thread Windlass corrosion?.
      A large part of housing was corroded away. Now painted with special metals primer
    • Halo
      Halo replied to the thread Windlass corrosion?.
      I got loads of aluminium oxide out of mine. Corrosion of housing caused by water ingress from above due to leaking seal. Sus
    • Halo
      Halo replied to the thread Windlass corrosion?.
      • 6729bff6-b16e-4e42-b1d3-4fce2eff9011.jpeg
    • Halo
      Ever since I retired I have been sailing in the winter. I just pick my days. I avoid frosty decks having found that sea water doesn’t...
    • Halo
      Halo replied to the thread 3YM30 heat exchanger O rings.
      O rings are sized on Inside Diameter and ring thickness
    • Halo
      Halo replied to the thread Yanmar dipstick thread broken.
      The lack of dipstick is a result of it being redundant in most cars. Most people never check oil , tyre pressure, tread, etc. New cars...
    • Halo
      Ralph McTell summed up single handing in his song “Wild Cape Horn” He said “If you want to love your life you have to flirt with death “
    • Halo
      Halo replied to the thread Suzuki dt 2.2.
      Only a tiny bit comes out of mine but it runs ok. Not sure if there is a thermostat that restricts flow. When I got mine several years...
    • Halo
      Halo replied to the thread Yanmar SD25 - water in oil?.
      I suggest you keep a sample of the oil that Yanmar provided. If you get into a dispute it could be valuable.
    • Halo
      Halo replied to the thread Yanmar SD25 - water in oil?.
      The Millers oils 80/90 multigrade I use does not froth like that
    • Halo
      Halo replied to the thread Yanmar SD25 - water in oil?.
      Hi Wonkywitch I meant that I keep the level lower than recommended by setting the level with the dipstick screwed in as imho this is the...
    • Halo
      Halo replied to the thread Yanmar SD25 - water in oil?.
      I changed the bearings and seals on mine. The shaft is prone to wear and allow water in. In my case I needed to sleeve the shaft as...
  • Loading…
  • Loading…
Top