BAtoo
Well-Known Member
Son has just bought an old (1985 ish) 40HP, 2-cylinder, 2-stroke OB for his RIB. It runs OK at low and mid revs and for about 30secs at full power then one cylinder seems to cut out. After a bit it cuts back in.
We have tried:- new plugs, checked the impeller, removed and cleaned the carbs, by-passed the fuel pump and filter with a new fuel line directly onto the the carb inlet and manually pumping the fuel (from a new tank). Its new fuel & new oil.
When it has its problem there is a red light on the front next to the fuel inlet which comes on.
Any ideas??
Thanks in advance...
We have tried:- new plugs, checked the impeller, removed and cleaned the carbs, by-passed the fuel pump and filter with a new fuel line directly onto the the carb inlet and manually pumping the fuel (from a new tank). Its new fuel & new oil.
When it has its problem there is a red light on the front next to the fuel inlet which comes on.
Any ideas??
Thanks in advance...