outboard expert wanted.

aztec

Active member
Joined
10 Oct 2001
Messages
2,522
Location
Poole Dorset
Visit site
hi, do you know whether a 20hp blueband lower gearcase, will fit a 40hp blueband leg?

are the ratio's much different, and would it make much difference, and are the props loads different.... and.. no that's it..

cheers chaps, regards, steve.

<hr width=100% size=1><A target="_blank" HREF=http://homepage.ntlworld.com/s.amos/index.html>http://homepage.ntlworld.com/s.amos/index.html</A>
 

jfm

Well-known member
Joined
16 May 2001
Messages
23,882
Location
Jersey/Antibes
Visit site
absolutely no way

I assume you're talking Mercury, from the mid 70s ish

Answer is definitely no. Completely different castings. The 20hp also had a swept back leg, so the angle between the drive shaft and the propshaft is more than 90deg, whereas the 40 had the traditional 90deg angle.

<hr width=100% size=1>
 
Top