One step back in boat buying

One has to ask why would you want to access the fuel tank on anything other than a one off occasion? How important is it.
Although I am very badly equipped to be an engineer it just seems to me that fuel should be clean hence access to the fuel tank.But It has just occurred to me a new fuel tank could replace the unknown installed one.
 
Although I am very badly equipped to be an engineer it just seems to me that fuel should be clean hence access to the fuel tank.But It has just occurred to me a new fuel tank could replace the unknown installed one.
Given the number of boats floating about and the relatively few stories of fuel contamination it shouldn't be your primary concern especially if you go for a boat with an outboard motor which one or two of you candidates have been.
 
Given the number of boats floating about and the relatively few stories of fuel contamination it shouldn't be your primary concern especially if you go for a boat with an outboard motor which one or two of you candidates have been.
Yes the outboard route really solves many of my reticences about boat buying…..I guess everyone has their little manias😏
 
I share your mistrust of ancient mistreated (or just unused, or unknown) diesels. As long as it's outboard-powered, the whole situation can go from a real head-shaking worry to resolved and off for a sail, in the time it takes to unbolt the old engine and lift on a new.
 
Vikings were a saga.....Game of Thrones was a saga. Mine was a few updates from me...and a lot of unhelpful advice from you.....cautionary yes....saga no
 
Yes the outboard route really solves many of my reticences about boat buying…..I guess everyone has their little manias😏
It would seem quite possible, in extremis, to apply "the outboard route" to a boat with an inboard engine, if you cant get the inboard to work, or if you want belt braces and a bit of string, to have both plus your sails. You would probably have to buy a bigger/longer shaft outboard than the one for the tender though, which would cost more, but still seems an option.
 
It would seem quite possible, in extremis, to apply "the outboard route" to a boat with an inboard engine, if you cant get the inboard to work, or if you want belt braces and a bit of string, to have both plus your sails. You would probably have to buy a bigger/longer shaft outboard than the one for the tender though, which would cost more, but still seems an option.
Quite a few boatI have seen sport an outboard which does not bode well for the inboard😏…….
 
Top