nmea multiplexer

steve28

Well-Known Member
Joined
19 May 2003
Messages
1,480
Location
Cornwall
www.falmouthgypsy.com
Last year another forumite posted a project for a nmea multiplexer, i am now in the position where i need one.
I am unable to find the post relating to this so i am asking if anyone else happed to save the details.

steve
 
Re: Raymarine recommend these...

I have investigated Brookhouse, and their range is very adaptable to different layouts - but they are not answering their e-mail on the website. I was asking who the UK agent is?
They are a lot cheaper than the Raymarine equiv.

Please let me nkow.
 
do you mean a multiplexer or expander?
A multiplexer takes many NMEA data streams in and puts them all together on a single data stream - v. complicated and not really DIYable unless you can do wonders with microcontrollers and embedded software. An expander takes a single NMEA data stream in and rebroadcasts it on multiple outputs, so that a GPS for example can talk to loads of different 'listeners'
I did a DIY expander last year - the ciruit diagram is around somewhere if you need it.
you could try these people for multiplexers http://www.shipmodul.com/en/index.html
 
What are you actually trying to achieve?

I've thought a lot about this - the complexity is in knowing which occurrences of which sentences to drop in order to fit your quart into a pint pot.

For any given application this is comparatively easy - to do it in the general case is much more complex, and would require fairly powerful computation in the multiplexer that would significantly increase the hardware complexity and cost.
 
I have a raymarine rn300 gps,a ds400x fishfinder,and st1000+, wind instrument and laptop.

If i use the gps and wind together with autopilot in windtrim it works fine, if i turn the fishfinder or laptop on the wind info dissapears, turn them off and its back.

the way i see it there is too much talking and not enough listening or the talkers are too loud /forums/images/graemlins/smile.gif



steve
 
NMEA is strictly one talker per circuit - any more than that then you are very lucky if it works at all.

In my present set up I have a switch to select whether the autohelm receives wind data or gps data, but not both. I can't see that it is useful to feed the fishfinder data into the autohelm, so that can be ruled out.

If your laptop is a central part of the system then you could use that as the multiplexer - which would make the task a good deal simpler.
 
ShipModul

Me too .. easy to install, worked first time. Pretty good price too, though perhaps not the cheapest certainly far from the most expensive. They have a range of connectivity options for connection to a PC (ie blue tooth etc)

Regards, Jeff.
 
Top