colhel
Well-known member
So now Infinity has been hoisted and is out of the water for the first time since December 2019 the planned spruce up can get underway. The amount of work I attempt will depend on my enthusiasm, the weather and other stuff getting in the way. It might end up that I just squirt it with a jet washer in March and launch in April.
Looking first at the outside jobs that need doing.
First thing I noticed was the prop anode had completely gone. Bit of an unusual set up due to the shaft having no tapped hole to fix an anode so I made my own prop nut out of alli bronze to accept an off the shelf anode.
Prior to launch in 2019
A few days ago
Some damage to the topsides needing some tlc
I've made a start on the woodwork.
Riders On The Storm
Looking first at the outside jobs that need doing.
First thing I noticed was the prop anode had completely gone. Bit of an unusual set up due to the shaft having no tapped hole to fix an anode so I made my own prop nut out of alli bronze to accept an off the shelf anode.
Prior to launch in 2019
A few days ago
Some damage to the topsides needing some tlc
I've made a start on the woodwork.
Riders On The Storm