misterg
Well-Known Member
I'm looking to buy my first boat, and have had an offer accepted on a
Newbridge Venturer (22' bilge keel) subject to survey.
The surveyor (fairly well respected) has identified blistering on the hull
(completely dry, hence not osmosis), but more importantly, flexing and
depression of the hull aft of the keels, sufficient to crack the gel coat
on one side (on the keel stubs and for about 200mm around). The area can be
seen flexing if the stern of the boat is lifted. The surveyor has
recommended that the boat be supported to take out the distortion, then the
hull strengthened with additional layers of glass and an internal
transverse stiffener, followed by grinding out the gel-coat cracking (& any
laminate that is also cracked) and re-building. In order to do this, it
will be necessary to cut out the interior for access.
If the vendor was to complete this work, we would proceed with the sale at
the agreed price, however the vendor considers the work unnecessary
("trailer damage"), and will only undertake the repair of the gel coat
cracking. The yard (Dickies in Bangor) are reluctant to quote for the work
as they need to cut away the interior to get an idea of what is involved,
and are dubious about being able to effect a repair that will prevent the
flexing. They have estimated upto £1500 for the work, but aren't keen to
take it on (this is on an £8.5k boat). Having contacted the owner's
association (NAVA), this seems to be an unusual fault for the Venturers.
We are still interested in the boat as it has new sails, engine,
instruments, etc. but without completing the work recommended by the
surveyor, we would be unable to insure the boat (it's nearly 20 years old).
What advice do you have? - should I take the boat on (with some reduction
in price) and sort the repair myself, or should I walk away ? Has anyone
had any experience of this fault with Venturers (Ventura's)?
All advice gratefully received.
Regards,
Andy
<hr width=100% size=1>
Newbridge Venturer (22' bilge keel) subject to survey.
The surveyor (fairly well respected) has identified blistering on the hull
(completely dry, hence not osmosis), but more importantly, flexing and
depression of the hull aft of the keels, sufficient to crack the gel coat
on one side (on the keel stubs and for about 200mm around). The area can be
seen flexing if the stern of the boat is lifted. The surveyor has
recommended that the boat be supported to take out the distortion, then the
hull strengthened with additional layers of glass and an internal
transverse stiffener, followed by grinding out the gel-coat cracking (& any
laminate that is also cracked) and re-building. In order to do this, it
will be necessary to cut out the interior for access.
If the vendor was to complete this work, we would proceed with the sale at
the agreed price, however the vendor considers the work unnecessary
("trailer damage"), and will only undertake the repair of the gel coat
cracking. The yard (Dickies in Bangor) are reluctant to quote for the work
as they need to cut away the interior to get an idea of what is involved,
and are dubious about being able to effect a repair that will prevent the
flexing. They have estimated upto £1500 for the work, but aren't keen to
take it on (this is on an £8.5k boat). Having contacted the owner's
association (NAVA), this seems to be an unusual fault for the Venturers.
We are still interested in the boat as it has new sails, engine,
instruments, etc. but without completing the work recommended by the
surveyor, we would be unable to insure the boat (it's nearly 20 years old).
What advice do you have? - should I take the boat on (with some reduction
in price) and sort the repair myself, or should I walk away ? Has anyone
had any experience of this fault with Venturers (Ventura's)?
All advice gratefully received.
Regards,
Andy
<hr width=100% size=1>