Navman GPS pinout

[CliveG]

Hi

I have a active GPS aerial unit from a Navman 5507 Chart plotter.
The plotter is u/s due to water ingress.
I have need of a GPS feed for an alarm system.
Being a tight-wad I want to try to reuse the aerial.
Can anyone point me to the pinout details of the aerial unit.
The lead is terminated in a multi pin socket that did plug into the plotter.

 

[pau1gray]

5507 Manual

From Page 64 in the manual

From the Power/Data cable plugged into the Black connector
1 Black 0V / Ground
2 Brown Not Used
3 White NMEA Out
4 Blue NavBus -
5 Red Power In
6 Orange navbus +
7 Yellow Auto Power in
8 Green External Alarm

So you will need 1 Black 0V and 3 White NMEA out
HTH

 

[pau1gray]

Ahhh just re read your question so ignore my last

 

[saltwater_gypsy]

Are we having a personality conflict sir????

 

[pvb]

Yes, the pinout info is here.

 

[CliveG]

pvb

Thank you, that is just what I needed.
Couldn't find it my self.

 

[pvb]

No, I had help from Google....