Motor Factor parts for use on KAD32 engines

oGaryo

oGaryo

Well-Known Member
Joined
28 Nov 2008
Messages
8,203
Location
Isle of Wight
Visit site
Sorry for all the posts related to annual maintenance :o

I recall a thread from a couple of years back where someone (was it David - FlowerPower?) posted a list of part numbers for things like belts, filters etc that could be purchased from, say, Halfords at the same or better spec as the hiked in price marine part equivalent.

I've looked but cannot find it, can anyone help please? I am particularly interested in the belts and the air filters.

Many Thanks
 
Belts - major size commonly 10, 12 or 17 mm plus circumference. Run a piece of string around the belt and take off about 20mm, the adjuster will take up any difference. Any decent bearing supplier. Suggest SPZ or XPZ type.

Filters go here and put in the OEM part no. http://catalog.baldwinfilter.com/

For cross referencing other filters put the in the same comparison chart and see if the same Baldwin item comes up. For the oil filters I probably already have these listed and loads of new for a few quid, but the ones I have are quite long so you would need to check you have space.

I will see if the part numbers for the KAD32 are similar to the details I have for TMD40 and TAMD60.
 
superheat6k said:
Belts - major size commonly 10, 12 or 17 mm plus circumference. Run a piece of string around the belt and take off about 20mm, the adjuster will take up any difference. Any decent bearing supplier. Suggest SPZ or XPZ type.

Filters go here and put in the OEM part no. http://catalog.baldwinfilter.com/



For cross referencing other filters put the in the same comparison chart and see if the same Baldwin item comes up. For the oil filters I probably already have these listed and loads of new for a few quid, but the ones I have are quite long so you would need to check you have space.

I will see if the part numbers for the KAD32 are similar to the details I have for TMD40 and TAMD60.
Click to expand...

There is nothing that cross refers from the kad 32 to the Tamd 60 series, the fuel filter looks the same but is a different micron rating, that's of course if you want to be 100% right fitting though they look the same.

The genuine Volvo ones also look the same on the two engines but are different part numbers. Some aftermarket companies who I will never mention there name on here again can supply aftermarket filters.
 
STEVEDUNSTABLE said:
http://sealineforum.co.uk/t101-volvo-penta-kad32-cross-reference-parts
Click to expand...

that's the jobby Steve :encouragement: Knew I'd seen it somewhere. Going to put a few orders into Euro Car Parts for the belts and Air Filter :cool:

Volvo KAD32

Power steering Belt - Volvo No. 973487
Car shop - 6375MC or MBF1013

Alternator Belt - Volvo No. 977542
Car shop - 6469MC or MMB987

Primary Belt - Volvo No. 861564
Car shop - 7PK925 78359 or MMR7925

Compressor Belt - Volvo No.3581460
Car shop - 68376 6PK1138 or MMR61150

Air Filter - Volvo No.463505
Car shop - Champion U531 (As used in 240 1.7DL.GL B17A 1979 onwards)

FRAM Filters
air CA4365,
oil PH 2861B ,
diesel P5770
 
kad32parts_zps28f32b4b.png
 
volvopaul said:
There is nothing that cross refers from the kad 32 to the Tamd 60 series, the fuel filter looks the same but is a different micron rating, that's of course if you want to be 100% right fitting though they look the same.

The genuine Volvo ones also look the same on the two engines but are different part numbers. Some aftermarket companies who I will never mention there name on here again can supply aftermarket filters.
Click to expand...

Unfortunately the Baldwin site doesn't mention micron ratings. I use 30 micron on the prefilters & 10 micron on the fine filters.

The VP crank vent filter 876069 is available as a pattern part from these people for a more realistic price.

http://www.yachtboatparts.com/volvo-penta-crank-case-breather-filter-876069-1399-p.asp
 
You must log in or register to reply here.

Share this page

Top