Tyler ride
New Member
MD1 still available
Hi do you have partsWeight 365 lbs.
Spares for md1 are hard to get, I'd snap them up.
Looking for any parts you
The two posts to which you are replying are thirteen years old. You would probably do better to post in the "Wanted" forum.Hi do you have parts
If yours still has a running MD1, I have a set of emergency spares you can have for the postage. You'll recognise it as it's a huge single cylinder deisel with a flywheel that wouldn't disgrace a tractor.
You'll find the instruction book atI brought a mk1 can anyone tell me about starting my Volvo Penta MD 1 turn over has compression
To start a cool engine, set throttle at 50% , press cold start button on top of fuel injector pump to enrich the mixture, then turn ignition key to start position until it fires or battery goes flat.I brought a mk1 can anyone tell me about starting my Volvo Penta MD 1 turn over has compression
Where are you locatedTo start a cool engine, set throttle at 50% , press cold start button on top of fuel injector pump to enrich the mixture, then turn ignition key to start position until it fires or battery goes flat.
I have a secondary fuel filter, goose neck fitting and an alternator in the shed if anyone wants it.
ShropshireWhere are you located
Barrie ONT CanadaShropshire
Why do you ask?Shropshire