pwb12
New Member
Anyone know where I might get a workshop manual for the Iveco 8061 srm 25..all the links I have tried are of a spurious nature.
Thanks
Thanks
Iveco aifo srm 25
- Thread starter pwb12
- Start date
vas
Well-Known Member
I've got the 8061SRM33 workshop manual as well as a 4page specs on the SRM25 and a tech.drawing with all views of the engine with dimensions.
All files are in PDF, happy to email them to you if you PM me your email. (w/s manual is 8MB, the others are 1.5 and .4MB)
I'd expect that many of the procedures on the SRM25 and the SRM33 are similar (both straight six, turbocharged, displacement and power differ)
cheers
V.
All files are in PDF, happy to email them to you if you PM me your email. (w/s manual is 8MB, the others are 1.5 and .4MB)
I'd expect that many of the procedures on the SRM25 and the SRM33 are similar (both straight six, turbocharged, displacement and power differ)
cheers
V.
Shytalk
New Member
Did you manage to get hold of a manual?
Jim@sea
Well-Known Member
Can you not find out what UK Iveco vehicle this engine was fitted in and get a workshop manual for that although it wont have the marinised bits.
I had a brilliant Iveco 2.5 diesel engine in a French boat it was the same engine as fitted to the Iveco Diesel Van. I had loads of trouble in getting spares as apparently Iveco were not imported into the UK although loads of French and Italian boats were fitted with them
I believe that are also known as AIFO.
One part I had trouble getting was a a Lower Bearing for the Cam Belt. I bought three bearings, one of the 2.5 Iveco Vaan, one for an Industrial Generator with a 2.5 Iveco engine , one for an Iveco engined Water Pump , they were all the same but different than the one that was fitted . The boat was 20 years old and it looked as if this Cambelt Bearing had never been changed as it still had the red overspray on the bearing.
There was an Iveco dealer in Southampton that I bought some stuff off.
nymtek
New Member
Hi Vas,
Do you still have the manual for the 8061 SRM, would be very happy to receive a copy.
Thanks
vas
Well-Known Member
yep,
just checked my files, Workshop manual 10.96
covers 8061 SRM33.10 /12 / 40/ 42.
need more than 5 posts (iirc) in order to be able to PM me your email.
Else, post your email here (with the danger of having it picked up by bots and receiving some more spam over time...)
cheers
V.
just checked my files, Workshop manual 10.96
covers 8061 SRM33.10 /12 / 40/ 42.
need more than 5 posts (iirc) in order to be able to PM me your email.
Else, post your email here (with the danger of having it picked up by bots and receiving some more spam over time...)
cheers
V.
nymtek
New Member
Hi Vas,
I have created an email for the purpose: ybwIvecoaifosrm25@outlook.com
Please also send the 4 pages of specs if you still have.
Would be very much appreciated and helpful.
Thanks a lot
I have created an email for the purpose: ybwIvecoaifosrm25@outlook.com
Please also send the 4 pages of specs if you still have.
Would be very much appreciated and helpful.
Thanks a lot
vas
Well-Known Member
email sent
you might as well, edit your post and remove the email link...
V.
you might as well, edit your post and remove the email link...
V.
Daniel walsh
New Member
Hello Vas,
Wondering if you still have the manual available, would it be possible to email it on to me?