hurth gearbox

[gery w]

Hi does anyone have any info as to where i can purchase a full rebuild kit for my hbw20 gearbox. I am finding it difficult to get any info on this unit as it is no longer listed on the hurth website or if anyone has one their willing to part with i would really appreciate it regards Gerry

 

[Firefly625]

Hi does anyone have any info as to where i can purchase a full rebuild kit for my hbw20 gearbox. I am finding it difficult to get any info on this unit as it is no longer listed on the hurth website or if anyone has one their willing to part with i would really appreciate it regards Gerry

http://cgi.ebay.com/ebaymotors/Overhaul-Kit-Transmission-Hurth-HBW-20-200-250-_W0QQcmdZViewItemQQhashZitem35aed92935QQitemZ230566734133QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear

any good?

 

[Latestarter1]

Hi does anyone have any info as to where i can purchase a full rebuild kit for my hbw20 gearbox. I am finding it difficult to get any info on this unit as it is no longer listed on the hurth website or if anyone has one their willing to part with i would really appreciate it regards Gerry

Hurth website no longers exists and you are quite correct that the ZF Marine site no longer gives cross reference to the old Hurth nomencleture.

For small ZF stuff Bob Knowles has always been very helpful:http://www.bobknowles.demon.co.uk/

As ususal the big however, I have always been under the impression that the little Hurth boxes were not cost effective to repair as they are cheap as chips new

 

[gery w]

thanks for the replies so far im now looking at importing a box from the states which is coming in at £785. Does anyone know how much the import duty would be?

 

[SAMYL]

thanks for the replies so far im now looking at importing a box from the states which is coming in at £785. Does anyone know how much the import duty would be?

Why not buy one of these rebuild kits on ebay for £35. These gearboxes are easy peasy to work on so you could do it yourself.
What is actually wrong with it anyway, they are usually quite sturdy wee boxes and don't give a lot of problems unless not looked after properly?

http://cgi.ebay.com/ebaymotors/Over...7578398QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear

Ooops, beaten to it!

 

[gery w]

hi rebuild is not an option as some guy that calls himself a marine engineer opened it up and scattered the parts to the wind so im trying to find a replacemennt or an alternative thanks

 

[SAMYL]

Post on here for a gearbox wanted, you never know who may have one, even one for parts.

 

[PetiteFleur]

When I rebuilt a Hurth G/box some years back I used ASAP Supplies - good prices and delivery.

 

[gery w]

thanks for the sugestions guys ill give it a try