How are the team getting the raw water filter undone? Mine's stuck

[rogerthebodger]

Bodging is better.

However, be aware that not all Vetus raw-water strainers with a clear plastic top have the large cross embossed on the lid. My Vetus strainers don't which means I had to rely on the strap wrench.

Richard

Also a strap wrench can be used to open other jammed lids or spin on oil/fuel filters.

 

[davidpbo]

I had the same problem with some multicore cable connectors at work. The fabric strap wrench which fits on a 1/2 inch drive worked best for me, and for removing oil filters in awkward locations on car engines. I broke the rubber ones as the connector cases were done up so tight.

 

[paulajayne]

A plumbers wrench is probably your friend. I don't mean a Stilson, but those adjustable jaw pliers. Great for oil filters too.

Edit:- like these https://www.screwfix.com/p/irwin-vice-grip-12-groove-joint-pliers/43518

Called Gland Nut Pliers

 

[Newbroom]

When all else fails. Jut buy a new Vetus lid and break the old one off. Not great if you are miles out with a blocked strainer but a solution when tied up safely

 

[PCUK]

Hot water poured onto cover to slightly expand it.

 

[Daydream believer]

I had the same problem with some multicore cable connectors at work. The fabric strap wrench which fits on a 1/2 inch drive worked best for me, and for removing oil filters in awkward locations on car engines. I broke the rubber ones as the connector cases were done up so tight.

+1
I used one a lot on my digger & dumper filters etc
Best option if you have one.
Mine has a 10 mm drive one end & 12 mm drive on other end of the spindle which is handy even if you never need it
+