Help identifying connectors

[davidwf]

Can anybody identfy the distribution strip shown in the picture on my web site, want to add an additional connector but cannot find out where to buy them.

http://www.arlanza.co.uk/

<hr width=100% size=1>

 

[david_bagshaw]

I think you will find they are a standard type of electrical connector, as supplied by any good trade counter.

The individual bits clip on a rail, there being all sorts of goodies avaailable, fuses, link bars, etc


<hr width=100% size=1>David
<A target="_blank" HREF=http://www.euroboating.net>http://www.euroboating.net</A>

 

[davidwf]

Many thanks have tracked them down now, they are called rail mounted terminals once I figured that out Goggles churning out loads.


<hr width=100% size=1>

 

[philip_stevens]

They are DIN rail terminals for either symetric or assymetric rail.

Look at http://makeashorterlink.com/?U220212C5 but the terminals can also be obtained from other sources.

(the makeashorterlink.com was used at the RS url was sooooo long).

<hr width=100% size=1>regards,
Philip