fouled anchor

EdWingfield

Well-Known Member
Joined
10 Apr 2006
Messages
1,553
Location
Campbeltown
Visit site
We had a boatload of folk, which included plenty of muscle. That turned out to be a good thing due to the predicament – I will explain.

The f5/6 was too strong for the dinghies, so we sailed the 6M from Holy Island to the Farne Islands in the yacht. A well sheltered anchorage was selected tucked behind West Wamses on clean sand. (the bottom is clearly visible to 5m)

Sandwiches and beer done, it was time to raise anchor. The electric windlass at that time was out of order, but due to the manpower aboard this did not present a problem. After starting the engine I asked Tim to go forward and haul up the anchor, I would nudge the boat forward on engine to ease the strain.

After a while, those of us in the cockpit realised that Tim was struggling, so I asked David to assist. He duly took place behind Tim on the chain..... Now more alert to the situation I saw that the chain was now vertical and coming in at a very slow rate. I joined the team on the foredeck, who by now were uttering words that gentlemen should not!

What gradually emerged from the depths was a boulder, perfectly cupped in the ‘cradle’ of the Bruce anchor. By inches, the $astard was brought to the surface and the chain made fast. (I assure readers that my description of that rock is mild compared to the language of the foredeck) I went aft to fetch the boathook and with some effort it was dislodged and sent back to the depths.

Now, reassured that our cardio-vascular systems were in reasonable shape, we returned to Holy Island.
 
I had a far worse experience due to the same cause: Anchored overnight with a Bruce (on a trial of it!). In pitch dark, became aware of increasing motion: thought ''wind-shift, swell working in?''. Went on deck to find we had dragged out of the bay: all hands on deck; engine started; all muscles to the rode: up came Bruce with boulder too big to lift out. Had to get right over the bow, head in waves, to secure line to tripping-eye, hitch to haliard, and winch like b----ry to capsize the anchor and drop the rock.
Promptly reverted to CQR and gave Bruce away to someone else keen to give it a try (vowing HE would never dream of anchoring on rocky ground!)
Advice you can give, but not experience!
 
Up here the Bruce works well. My main anchor is a 20kg and I've just changed the kedge from a 5kg CQR to a 5Kg Bruce. Both have never misbehaved yet.

The mud hereabouts is peculiar, it has a 'crust' which the CQR failed to penetrate, simply skidded along the surface.

CQR for sale, buyer to collect (Tyneside)
 
This is one of those times you wish you had :

Buoyed your anchor by attaching line / buoy to tripping ring. Lift by that and anchor is near vertical allowing most to fall away ...

But I know how you feel ! Even a CQR caked with mud can be a right B to lift .....
 
We could see bottom when we dropped anchor sbc, and it was clean sand. You'd think no need to set up a trip line. The boulder must've been buried just below the surface.
 
My post was tongue in cheek ....

Also the fact that the anchor would be pulled at a different angle MAY assist the anchor to come out at an angle that allows the boulder etc. to "roll" out...... at least you have option to pull at different angle / part of anchor ......

To original poster - I did note you said water was clear and again - I say - reply was tongue in cheek ....
 
Top