IanDoyle
New Member
Hi All,
Does anyone have experience or knowledge around converting a boat from using a diesel engine to a hybrid electric power system.
So this would mean a large battery bank powering a electric motor and a generator to recharge the batteries and / or drive the motor when they are empty. The obvious advantages would be a completely silent boat when running on batteries and a mostly silent boat when the genny is running, altho this is dependent on sound insulation etc. Would also mean that you could recharge when hooked up to shore power and trickle charge with a solar panel. At a high level the diagram below describes the ideal scenario
https://www.fischerpanda.co.uk/res/48v_1x10kw_Shaft_BMV_GENSET_1.pdf
I currently have a 38' Broom cruiser with a Perkins diesel which runs very well so probably not something that I'm going to do soon but the idea of a silent boat with a fully electric drive system is awfully appealing! The boat itself should be well set up to do this (I'd hope anyway). The engine comp is quite large and very accessible, currently has a hydraulically driven prop but I'm guessing I would just connect the motor direct if I converted? Depending on cost, I'm thinking something like a 6 or 8Kw 48V Generator with a 600a Li-ion battery bank.
Wondering if anyone has done this or has any advice etc.
Thanks,
Ian
Does anyone have experience or knowledge around converting a boat from using a diesel engine to a hybrid electric power system.
So this would mean a large battery bank powering a electric motor and a generator to recharge the batteries and / or drive the motor when they are empty. The obvious advantages would be a completely silent boat when running on batteries and a mostly silent boat when the genny is running, altho this is dependent on sound insulation etc. Would also mean that you could recharge when hooked up to shore power and trickle charge with a solar panel. At a high level the diagram below describes the ideal scenario
https://www.fischerpanda.co.uk/res/48v_1x10kw_Shaft_BMV_GENSET_1.pdf
I currently have a 38' Broom cruiser with a Perkins diesel which runs very well so probably not something that I'm going to do soon but the idea of a silent boat with a fully electric drive system is awfully appealing! The boat itself should be well set up to do this (I'd hope anyway). The engine comp is quite large and very accessible, currently has a hydraulically driven prop but I'm guessing I would just connect the motor direct if I converted? Depending on cost, I'm thinking something like a 6 or 8Kw 48V Generator with a 600a Li-ion battery bank.
Wondering if anyone has done this or has any advice etc.
Thanks,
Ian