25 Jan 2020 #1 graham Well-Known Member Joined 16 May 2001 Messages 8,108 Visit site Its very slow.cap removed even tried blowing down cap.slow dribble.any suggestions?
25 Jan 2020 #2 pvb Well-Known Member Joined 16 May 2001 Messages 45,589 Location UK East Coast Visit site Could the drain tap be blocked by gunge? Can you unscrew the whole tap?
25 Jan 2020 #3 B Billyo Well-Known Member Joined 6 Nov 2016 Messages 219 Location Swanage Visit site Yep, its very slow! Assuming the same sized drain it takes about 15 minutes for me to drain down my beta 50.
Yep, its very slow! Assuming the same sized drain it takes about 15 minutes for me to drain down my beta 50.
25 Jan 2020 #4 graham Well-Known Member Joined 16 May 2001 Messages 8,108 Visit site I don't think there's a blockage.I unscrewed the drain plug out of the tap and poked around .blowing down the filler cap helps a bit.Just need more patience I think !
I don't think there's a blockage.I unscrewed the drain plug out of the tap and poked around .blowing down the filler cap helps a bit.Just need more patience I think !
25 Jan 2020 #5 Pye_End Well-Known Member Joined 5 Feb 2006 Messages 5,310 Location N Kent Coast Visit site I use an oil extractor pump up mine. Easier then not to create too much mess. Just needs a bit of tape to make up the diameter.
I use an oil extractor pump up mine. Easier then not to create too much mess. Just needs a bit of tape to make up the diameter.