Don't tell swmbo

rich

Well-known member
Joined
7 Jun 2001
Messages
3,078
Location
JERSEY
www.portofjersey.je
Don\'t tell swmbo

But I have just put my salt encrusted outboard carb,,,,,,,,in the dishwhasher, with tonights dishes /forums/images/graemlins/tongue.gif
 

rich

Well-known member
Joined
7 Jun 2001
Messages
3,078
Location
JERSEY
www.portofjersey.je
Re: Don\'t tell swmbo

Useless washing machine.needle jet still solid. new carb USA $250 ,,,UK £248?????
I have tried all the trix's Coke, vineger, Acid????
 

andyball

New member
Joined
1 Jun 2001
Messages
2,043
Visit site
Re: Don\'t tell swmbo

Is it the centre hole of the needle jet that's blocked- where the needle goes? or the little holes in the sides?

I've unblocked hundreds of m/cycle jets ( even teensy pilots) by carefully choosing a suitably sized strand of soft copper wire & twisting & poking about. never any probs with making the hole too big, the wire doesn't seem to be as hard as the brass jets.
 

rich

Well-known member
Joined
7 Jun 2001
Messages
3,078
Location
JERSEY
www.portofjersey.je
Re: Don\'t tell swmbo

It's the float needle corroded with salt.
The engine went under at the end of last season, i got it running, then laid it up for the winter,"big mistake"
 

ccscott49

Active member
Joined
7 Sep 2001
Messages
18,585
Visit site
Re: Don\'t tell swmbo

Dish washer is no good, the tablets are 50% salt!! You need to soak in fresh water, try boiling the bugger!
 
Top