DIY anti fouling tips please

[Momac]

I tried an electric sander for about a minute.
So much toxic dust. I realised wet sanding is the only way.
The sanding mesh was really good

 

[Pleinmont]

Not tried sanding mesh before, looks good! Thanks for the tip

 

[russ]

I sand mine using a Festool vacuum sander and also wear a mask. No dust.
Don't mess around with a small 4" roller. I found it easier to use an extension pole with a wide roller. Covers quickly and you can stand back without kneeling down too much.

 

[rogerthebodger]

Cut 3 holes in a black bin bag and put over head with arms through side holes.

Tape a smaller plastic bag on head and get mask and goggles to protect eyes and lungs.

Roller with long extending handle.

If bilge keel get car creeper to lie on back tp paint between bilge keels

I used to do my 50 ft myself but now get someone in to antifoul my boat

 

[Adetheheat]

Use blue masking tape. The other stuff permanently sticks and you have to scrape it off