CAPTAIN FANTASTIC
Well-Known Member
How many people here have bilge/twin keelers? How many would have liked to have a bilge keeler? And how many would have wished to change their bilge keeler for a fin or long keel instead?
I took the bilge keels off the winter before last. Honest.
How many people here have bilge/twin keelers? How many would have liked to have a bilge keeler? And how many would have wished to change their bilge keeler for a fin or long keel instead?
What type of keel do you have now? if the boat has no bilges, is the sailing performance better or worse?
I have just sold my bilge keeler, beached once and kept on a wet mooring.How many people here have bilge/twin keelers? How many would have liked to have a bilge keeler? And how many would have wished to change their bilge keeler for a fin or long keel instead?
I have just sold my bilge keeler, beached once and kept on a wet mooring.
What type of keel do you have now? if the boat has no bilges, is the sailing performance better or worse?
My old Mirage 28 was a cracking boat, easy to handle single handed. I just never used the ability to beach it.I mistakenly thought I would time in retirement for two boats. Twin keeler (the shorter of the two) will probably go, but a cheap half tide mooring in a sheltered harbour doesn't really make me feel any urgency to sell. I have gone into a harbour with a drying entrance an hour or more after a friend passed it by for lack of water. Draft is 1.2m and one reason for purchase was that it would - if I wanted - do the French canals. Easy to clean the hull mid season by drying out (useul the time the chandler sold me fertilizer rather than antifoul). It's got a very big main and is pretty sporty. If there had been a larger version of it available, I would certainly have considered that rather than the fin keeler I did buy. RMs look fabulous to my eye.
It is quite clear that you only have a twin keel/bilge keel sail boat if you need it for drying out or shallow water operation.

I removed the bilge plates on my Eventide over 20 years ago and deepened the central long keel by about 9" also adding additional ballast. Reason for doing it was that despite being in shallow Poole harbour I rarely dried out (most of it is soggy mud!) and have a deep water all tide mooring (then a marina berth). Transformed the boat.
All types of keel have their place - that is why they exist - and your choice depends on your priorities. The usefulness of twin keels, shallower draft and ability to dry out tends to decline as boats get larger. There are some really good boats of that type in the 28-33' range where the performance loss is marginal compared with their fin keel sisters and make very capable offshore cruisers.
Ashlett Creek, depth of water about 3ft so a little ploughing required to reach the pontoon.
Pete
View attachment 70015