ronsurf
Well-Known Member
Someone must have had a quiet word with the Guardian. They wrote this 12 days later:
http://www.theguardian.com/media/2011/oct/21/radio-4-controller-reassures-future
Someone must have had a quiet word with the Guardian. They wrote this 12 days later:
http://www.theguardian.com/media/2011/oct/21/radio-4-controller-reassures-future
Once that happens we won't have a radio at home as DAB doesn't work in our house! Same as analogue TV. We can't get Freeview so had to buy satellite. B*stard government cons
And when the last valves are gone, it would be possible to build a new 198kHz transmitter, with no valves in it.I don't think there is any contradiction or retraction there. The first article says
BBC Radio 4 long wave, which transmits on the 198 kilohertz frequency, relies on ageing transmitter equipment that uses a pair of the valves – no longer manufactured – to function.
The valves, at Droitwich in Worcestershire, are so rare that engineers say there are fewer than 10 in the world, and the BBC has been forced to buy up the entire global supply. Each lasts anywhere between one and 10 years, and when one of the last two blows the service will go quiet.
while second says
Reports of the death of BBC Radio 4's long wave broadcasts may be a little premature, it seems. They could continue for at least another 10 years, according to Radio 4 controller Gwyneth Williams.
Of course "they could continue for at least another 10 years" is about as vague as Debenham's "up to 50% or more off selected items", but ten years, ish, sounds like a reasonable service life estimate for a system with fewer than ten spare parts which are needed every 1 to 10 years available.
And when the last valves are gone, it would be possible to build a new 198kHz transmitter, with no valves in it.
These days you'd use transistors, but it would be a whole new transmitter, not plugging in a replacement like changing a board in your PC.
Solid state drop in replacement valves are widely available.
Solid state drop in replacement valves are widely available.
I'd be interested in seeing how these compare to the 6L6s in my guitar amp. Do they really handle 600V and 50W?Solid state drop in replacement valves are widely available.
And when the last valves are gone, it would be possible to build a new 198kHz transmitter, with no valves in it.
These days you'd use transistors, but it would be a whole new transmitter, not plugging in a replacement like changing a board in your PC.
It would of course be silly to leave it to the last minute.
And the question might be asked, do we need it?
Exactly, someone has decided they want rid of it and they come up with a volley of feeble excuses; always a giveaway that one. Sticking up a new mast would cost "many millions" or about a quarter of a new series of Top Gear.
There will be the usual politics and internal wrangles and then we will hear "Oh dear the knobs fell off" in about 10 years time
Exactly, someone has decided they want rid of it and they come up with a volley of feeble excuses; always a giveaway that one. Sticking up a new mast would cost "many millions" or about a quarter of a new series of Top Gear.
How much does a 1/2 megawatt LW transmitter cost these days?
The BBC aren't the only people broadcasting on LW though, are they? There are other stations on there, so how are they doing it? Are they all dependent on the remaining stock of valves that the BBC have bought?
The BBC aren't the only people broadcasting on LW though, are they? There are other stations on there, so how are they doing it? Are they all dependent on the remaining stock of valves that the BBC have bought?