TRH
Member
Hi Guys/Girls Help required, I have no Temperature Gauges fitted on my flybridge and would like to rectify this. Question: (how would I wire in new Gauges to my existing one's)
<hr width=100% size=1>
<hr width=100% size=1>
Adding Gauges
- Thread starter TRH
- Start date
omega2
Active member
All you require is the gauge and a 2nd station sender in place of the original, if you try to drive two gauges with the original sender you will get a 50% read out, ie 40 deg when in fact the engine is at 80deg, hope this helps.
<hr width=100% size=1>J HAMER
<hr width=100% size=1>J HAMER
TRH
Member
John many thanks for your post, it's given me an understanding of how things work. Regards Trevor
<hr width=100% size=1>
<hr width=100% size=1>
