290 Leg Steering yoke has come loose.

[robyonfrome]

Whilst cleaning up the steering yoke and helmet with the leg off, I must have pushed down on the helmet whilst sanding it and the yoke have dropped down, literally out of the housing. Do I just push them back up or is there something more sinister going on.

 

[Peanuts]

Hi

The steering yoke is secured by a 5/32" allen screw in the steering arm, so for starters I would push the steering fork/yoke back up, you need another person to assist here whilst you ensure the steering arm locates probably, then tighten the allen screw, job done.

Hope this helps.

 

[robyonfrome]

Thanks Peanuts that sounds a relief, now all Iv got to do is get to it, to tighten.