Recent content by Hornet_UK

No I didn't know about the void but I'll take a look at the weekend! My Trim Tabs are the same both work fine just the Steamboat indicator not indicating, I'll not lift again until next year but will post when it done.

Thanks for the update Nigbb, it sounds like I have a very similar problem for sure. Before I bought the boat there was a problem with one of the Trim Tabs leaking oil and this was repaired apparently. I suspect that fixing the leaky trim tab may caused the leaking into the boat issue plus my...

I've just found this thread and have asimilar problem with my C35, was there any conclusion on the cause and solution to the problem?

Thanks Greg2, do you find they last a bit longer than Zincs?

Hi All, I'm looking to replace the anodes on my new to me boat, she has VP D4-260s with DPHs. After some reading on the web I'm inclined to replace the existing Mag anodes with Aluminium instead of Zinc, I'm aware you shouldn't mix Ally & Zinc. If I use an Aluminium DPH anode kit should I use...

I have exactly the same question and would like to hear the consensus of the forum on this subject.

A couple of years ago the water pump on my 2GM20 started leaking badly, looks like the same pump type. I ended up speaking to Marine Power in Bursledon and they replaced the cam, bearing and put on a new face plate. They are very helpful and it would be well worth a phone call. PS. No links etc...

I dropped the rudder on my 31 last year, it need a lot wiggling and pulling down at the same time before it dropped.

Hi Ashcooner, I found this thread that might help: http://www.ybw.com/forums/archive/index.php/t-237066.html

Here's a link to a company in Germany I've used a couple of times for Dehler spares, the parts list can be a good guide to help identify what you need you need...

Cracking looking boat and I like your choice of wood in the cabin! :D

Hi Dylan, The first step would be to clear off any old **** that has built up over the years from the HDD (Hard Disk Drive) and make sure you have at the very least 20% free space. After that then use the system tools to defrag tthe HDD and see if that helps at all if not then you can start to...

Thanks for the advice and videos gents,:) you've all been a great help!:)

I did hear a clang in the heads the other day however I assumed it was one of the long haired Admiral's piercings tapping on the pan!

Thanks for the info I'll pop into the Chandlery tomorrow!