14 Aug 2002 #1 P PatrickJ New member Joined 2 May 2002 Messages 3 Visit site Anyone know the valve clearances for a Yanmar 1GM deisel engine.
15 Aug 2002 #2 J JimMcMillan New member Joined 5 Jan 2002 Messages 132 Location Scotland Visit site Set cold 0.20mm for both.
16 Aug 2002 #3 J jonlaw New member Joined 13 Aug 2002 Messages 133 Location Ireland Visit site 0.2mm cold for both. I have the Yanmar service manual if you need any procedures.
21 Aug 2002 #4 P PatrickJ New member Joined 2 May 2002 Messages 3 Visit site Thanks guys. I have a manual on order but still waiting. I have just fitted a new head so I can now at least run the engine with correct settings. Thanks again.
Thanks guys. I have a manual on order but still waiting. I have just fitted a new head so I can now at least run the engine with correct settings. Thanks again.
