tudorsailor
Well-Known Member
I need to replace the cable that goes from the switch and alarm in the cockpit to the box that contains the controller for the main electric furling. The system is made in the States. The cable has 5 cores/little wires within. I do not know what the proper term for this type of cable is.
The advice from USA is that I need a cable
with 5 conductors. There is very little current so an 18AWG or 20AWG conductor size would be sufficient. Not sure what that translates to in mm2 but it is not a very
large wire.
Ideally the conductors should be blue, red, brown, black and green
Could someone guide me to either what I should google or a good supplier?
Thanks
TudorSailor
The advice from USA is that I need a cable
with 5 conductors. There is very little current so an 18AWG or 20AWG conductor size would be sufficient. Not sure what that translates to in mm2 but it is not a very
large wire.
Ideally the conductors should be blue, red, brown, black and green
Could someone guide me to either what I should google or a good supplier?
Thanks
TudorSailor