Bruceyboy
New Member
Hi guys...... have rigged up a recon Thermo top c system to my home made hot tub.....(TESTING)... all good on initial cold water start..... primed, fired up and produced heated water......
Removed system for a couple of months!
Reconnected to hot tub and will not fire...... everything is the same apart from trying to start with already heated water .... around 37celcius....... ( is this ok? )
Fan starts..... water pump starts recirculating..... but NO Fuel pump priming and therefore no start..... pump operates if I give it 12v so I presume it’s not that.
Have pulled the fuse so many times but still the same result..... Have bridged the glow plug relay and it heats enough to give a few seconds of flame up but dies when fuel runs out........
Scratching my head guys..... ANY IDEAS?
Removed system for a couple of months!
Reconnected to hot tub and will not fire...... everything is the same apart from trying to start with already heated water .... around 37celcius....... ( is this ok? )
Fan starts..... water pump starts recirculating..... but NO Fuel pump priming and therefore no start..... pump operates if I give it 12v so I presume it’s not that.
Have pulled the fuse so many times but still the same result..... Have bridged the glow plug relay and it heats enough to give a few seconds of flame up but dies when fuel runs out........
Scratching my head guys..... ANY IDEAS?