Water tank inspection lid oceanis 350

tjfmmaes

New member
Joined
1 May 2002
Messages
120
Location
Zurich, Switzerland
Visit site
Hi

The inspection lid/cover of one of the watertanks on my Oceanis 350 (1987) has split and I can't find a replacement one. I tried Ancasta who, although very helpful, we not able to supply me with one.
The lid is red of the screw type variety, very similar in shape and size to the covers found on flare containers and the like. The diameter of the opening is about 145mm. Can anyone point me in the right direction please - it would make the cabin a drier place to be?

Thanks a lot

Thomas


<hr width=100% size=1>
 

StugeronSteve

New member
Joined
29 Apr 2003
Messages
4,837
Location
Not always where I would like to be!
Visit site
It sounds very much like the covers on my 331 (2002), might just be that Ancasta are not particularly interested, try an email to the factory. If all else fails I am sure you could make some sort of clamp down plate to close the hole.

<hr width=100% size=1>God only made so many perfect heads. The rest got covered in hair.
 
Top