Water Proof Grease - what is it?

It's used for packing bearings which run in contact with water such as waterpumps, rudder bushes etc. Often referred to a calcium grease or waterpump grease.

Most greases as waterproof but waterproof grease is exceptionally "sticky".

Richard
 
Greases are a two-part mixture consisting of oil carried in a 'soap' that increases its consistency for practical reasons. In the past, soaps were all mineral based, calcium, lithium and sodium compounds all being used for various purposes. Nowadays organic soaps are more common, urea being widely used. Greases are tailored for various purposes, including resistance to water and temperature, load carrying capability, consistency and others. Calcium soaps remain the most resistant to water but have lower thermal resistance.
 
Thanksforthe responses. As exMIMechE I should have known that. However, BSc courses in mechanical engineering were more based on theory and failed to deliver on practical engineering. That's my excuse anyway!
 
I was pretty sure Ramanol was a Lithium grease from memory, but I was able to confirm it by clicking on your link. :)


It depends on which Ramonol grease you are talking about!

Ramonol White grease is a lithium soap based grease

Ramonol Universal grease and Ramonol Advanced grease are both calcium sulphonate based .

https://www.gruebb.com/catlist.php?catid=29
 
Last edited:
Top