Volvo Penta NMEA Interface help

[FunkyMonkey]

Hi All

I have a 2011 Volvo Penta 5.0GXI-J engine and I'm looking to install the NMEA interface. I'm currently installing a new Raymarine Axiom 7 Multifunction Display at the helm and id like to have it linked to show engine gauges etc .. is there anyone in the know on here that can help, I've tried calling a few places and having no luck with part numbers, i see on the Volvo site there area few different part numbers but i want to make sure i get the right one.. is the interface all I need to order or do I need wiring harnesses etc...

Thanks !

 

[QBhoy]

Hi
You’ll need the Volvo Penta easy connect kit and appropriate harness adapter for the ray marine you have. Some even need a further adapter junction to make it work too, as far as I can tell. But most will get away with the easy connect I think. As long as your compatible. Last I looked it was about £130 or there abouts.

 

[FunkyMonkey]

thanks QBhoy I've managed to speak with someone and they have recommended a couple of options for me including the easy connect !