Volvo AD 41 Sea Water Pump advice

[Jonmendez]

Would one of you knowledgable lot know the suppliers and part number for the salt water pump bearing in the sea water pump for an AD41. Volvo do a rebuild kit that has lots of parts and is expensive when all I need is the bearing as it's dripping. They seem to fail pretty routinely at 3/400 hours! Shaft and the rest is still fine so begrudge them another £100 for the £10 part I actually need! I thought it was on here before but I can't trace the thread. Many thanks.

 

[aquapower]

Would one of you knowledgable lot know the suppliers and part number for the salt water pump bearing in the sea water pump for an AD41. Volvo do a rebuild kit that has lots of parts and is expensive when all I need is the bearing as it's dripping. They seem to fail pretty routinely at 3/400 hours! Shaft and the rest is still fine so begrudge them another £100 for the £10 part I actually need! I thought it was on here before but I can't trace the thread. Many thanks.

Volvo penta part no. 11010, retail at £18.12 inc vat, two required.

Outside size 40mm, inside 17mm and 12mm wide

 

[volvopaul]

It's the seals that make it drip, is there play in the shaft? The seal isn't a great design, infact a throw away part that fails sometimes quite quickly depending on use age or the lack of it.
I doubt that's the case with motala.
There is a bearing place I've used at farlington just off A 27 past port Solent turn off on M27.

Personally I'd just try a new seal first as there so cheap.

 

[Jonmendez]

Thank you to you both "the seal isn't a great design" what on a Volvo Paul I just so surprised!!!