Victron Argofet question

[Blue Seas]

About fit a three way argofet - there does not seem to be anyway to 'control' (prioritise) the outputs to different banks? So is it basically just a bank of one-way non-return valves or does it have any type of intelligent control? Do the bank numbers 1,2,3 have any influence on the diversion of power?
Cheers.

 

[VicS]

basically a three way splitter with a very low volt drop. All three outputs are the same with no priority or separate control.

See the data sheet
https://www.victronenergy.com/uploa...lators-with-alternator-energize-input-EN-.pdf

and the instruction manual
https://www.victronenergy.com/upload/documents/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf

 

[Blue Seas]

About fit a three way argofet - there does not seem to be anyway to 'control' (prioritise) the outputs to different banks? So is it basically just a bank of one-way non-return valves or does it have any type of intelligent control? Do the bank numbers 1,2,3 have any influence on the diversion of power?
Cheers.

basically a three way splitter with a very low volt drop. All three outputs are the same with no priority or separate control.

See the data sheet
https://www.victronenergy.com/uploa...lators-with-alternator-energize-input-EN-.pdf

and the instruction manual
https://www.victronenergy.com/upload/documents/Manual-Argofet-EN-NL-FR-DE-IT-ES-SE-TR.pdf

Thanks, that’s the way I read it but just checking I’d understood correctly I’ll put some separate isolators between the Argo and the batt banks just in case I ever do want prioritise