The origin of the word 'dinghy'

ChrisE

Active member
Joined
13 Nov 2003
Messages
7,343
Location
Kington
www.simpleisgood.com
The origin of the word \'dinghy\'

I now know. They are called that because of all the dings they put in the hulls of boats on swinging moorings. Latest example is a 12inch gouge right through and well into the gelcoat on the starboard side. At least it matches an earlier one on port!

Do others have this problem and have you found a solution for it?

Grrr

<hr width=100% size=1>
 

squidge

New member
Joined
6 Jul 2002
Messages
784
Location
East coast
Visit site
Re: The origin of the word \'dinghy\'

yep ,buy a rib or "rubber duck" as they are also known. No dings but can squeek.

<hr width=100% size=1>
leo_Man_dobbert.gif
 

celandine

Active member
Joined
12 Mar 2002
Messages
1,667
Location
Suffolk/Brittany
Visit site
re. dinghy banging

When the problem is due to the wind against the tide, I have had some success streaming a bucket on a length of rope from the stern of the dinghy. This acts like a drogue, discouraging the dinghy from blowing up tide and banging against the boat, in the middle of the night.

Mick

<hr width=100% size=1>
 

ChrisE

Active member
Joined
13 Nov 2003
Messages
7,343
Location
Kington
www.simpleisgood.com
Re: re. dinghy banging

Thanks for your replies, I should have been clearer I meant sailing dingies by used by others when we are not on board. I know that they are dingies by the characteristic mini-dings at boom level that precede the gouge.

Grrr mk 2

<hr width=100% size=1>
 

BarryH

Active member
Joined
31 Oct 2001
Messages
6,936
Location
Surrey
Visit site
Re: re. dinghy banging

Seen a few yachts on the Frome with 4 or 5 fenders with a board across them. Not very pretty but the boats seem to have scar free hulls. The board/plank doubles as a gangway in a few instances. Only really works if you moor on a river tho.

<hr width=100% size=1>
captain.gif
 
Top