William_H
Well-Known Member
Did a little pair of races yesterday. So they say things go wrong in 3 s. so went went for 2 packages. First dinghy on wrong side for departure from swing mooring. Pulled dinghy around to correct side only to have wind change and still wrong. Lost favourite old pair of pliers overboard. (will look for them today) Got away ok and got a good start first short race. (1 hr)
About 20 metres from start jib knot in sheet let go. Threaded up the other sheet to that side and son tried to attach other sheet. A bit of a gust and he fell overboard. Fortunately he hung on to gunwhale and handed himself along to stern to climb back on board. Lost a few metres on the opposition in the process. Yes I place a lot of trust in crew. So much so they did the last 2 races with out me. (and did well) Son dried off quickly in sun. (30 degrees)
Got beaten thoroughly in 2 races despite winning the start each time. Did I mention the other 2 were 32fters to my 21ft. Spinnaker helped to keep up top some degree.
Second race put spinnaker up too soon (a bit shy) badly manged sheets a gust and so broke spin pole. (CF wind surfer mast) Broke at a previous repair.
On the way back to mooring main sheet rope lost it's outer cover and fouled up. A wild roundup in a gust when sheet jambed.
So a few jobs to do before next Sunday. Including first wipe over of the hull after 7 weeks from new A/F. So the madness continues. ol'will
About 20 metres from start jib knot in sheet let go. Threaded up the other sheet to that side and son tried to attach other sheet. A bit of a gust and he fell overboard. Fortunately he hung on to gunwhale and handed himself along to stern to climb back on board. Lost a few metres on the opposition in the process. Yes I place a lot of trust in crew. So much so they did the last 2 races with out me. (and did well) Son dried off quickly in sun. (30 degrees)
Got beaten thoroughly in 2 races despite winning the start each time. Did I mention the other 2 were 32fters to my 21ft. Spinnaker helped to keep up top some degree.
Second race put spinnaker up too soon (a bit shy) badly manged sheets a gust and so broke spin pole. (CF wind surfer mast) Broke at a previous repair.
On the way back to mooring main sheet rope lost it's outer cover and fouled up. A wild roundup in a gust when sheet jambed.
So a few jobs to do before next Sunday. Including first wipe over of the hull after 7 weeks from new A/F. So the madness continues. ol'will