Tender to a classic?

PuffTheMagicDragon

Active member
Joined
16 May 2001
Messages
14,406
Visit site
I wanted a tender that looked 'classic'. I also wanted to reduce maintenance to a minimum. A rubber duckie seemed out of place so I designed and built my own. She is in fibreglass but looks like a clinker pram. Question: Is this an acceptable tender to a (modern) Classic or is it sacrilege?

HPIM0600.jpg


IMG_0018.jpg
 

sarabande

Well-known member
Joined
6 May 2005
Messages
36,047
Visit site
drat ! Not only does your ladder look tidy and clean, but you have colour matched your rowlocks to the hull.

The entrance to the Dragon's work-cave looks historic, too. :(


I hope that elegant tender gives you many years of service.
 

OldBawley

Active member
Joined
9 Aug 2010
Messages
984
Location
Cruising Med
Visit site
build this one in 1993 from a kit. Barrow 7`6” Modified the kit a bit, dingy is narrower than original.

http://s1155.photobucket.com/user/OldBawley/media/Mei1993-Kopie_zps243c421c.jpg.html


We liveaboard so the dingy is used all the time.
Lying anchors, laying and pulling fishing net, hunting for octopus, trolling for fish under sail and oar. Perfect for one, rows not that good with two people.
Saved more than one yacht laying kedges with that dingy using oars. Where outboard and inflatable start to get unmanageable, this dingy ( and my humble skills ) could get a kedge out.
As can be seen on the pic, I am related to Geppetto.

The updates : In 2006 the epoxy started to fail. So used the old wooden dingy to build a mold and made a new glass fibre dingy. Eliminated the dagger board case, changed to long keel.
:Swapped Johnson for the smallest Seagull ( 2007 )
:Made a new bigger sailing rig. Lugsail (2009 )
:Made new even bigger sailing rig ( 2014 )
 
Top