Suggestions for better locker closing fittings?

[steve yates]

My westerly has these for closing the lockers under bunks & sink etc.The locker doors themselves have all been removed & painted off white and I’d like to find something nicer than the originals to use for closing them.

The new saloon upholstery is a kind of sea green, the ceiling and locker doors white while all the mahogany trim is just sanded & oiled.
I’m thinking a bronze/brass/copper kind of finish, any suggestions as to what and where Iwould find this style of fastening? Or I could go for old fashioned bolts, which at least might hold them closed in a knockdown

Thanks.

 

[Refueler]

I have ones that fit on the inside ... and you put your finger through a hole ... they hold against all falling on the doors inside ....

Not sure what they are called .... but the holes have also neat wood rings fitted ... look really nice.

Found them ....


https://www.svb24.com/en/door-catch-rolled-brass.html

 

[Tranona]

I have ones that fit on the inside ... and you put your finger through a hole ... they hold against all falling on the doors inside ....

Not sure what they are called .... but the holes have also neat wood rings fitted ... look really nice.

Found them ....


https://www.svb24.com/en/door-catch-rolled-brass.html

Nearly all my lockers have those fitted. Work well but are tricky and time consuming to fit.

 

[Refueler]

Nearly all my lockers have those fitted. Work well but are tricky and time consuming to fit.

But they WORK well ....

 

[Tranona]

Yes if they are fitted correctly. Some of mine seem to be fitted for left handers. I also have the anti rattler fasteners on p64 here davey.co.uk/pdf/Catalogue21.pdf excrllrnt but hideously expensive

 

[greeny]

I have ones that fit on the inside ... and you put your finger through a hole ... they hold against all falling on the doors inside ....

Not sure what they are called .... but the holes have also neat wood rings fitted ... look really nice.

Found them ....


https://www.svb24.com/en/door-catch-rolled-brass.html

I call them fingersnappers. Got to be careful if finger in the hole and the boat moves/rolls.

 

[Boater Sam]

Got to be careful if finger in the hole and the boat moves/rolls.

I have always thought that............