Spray adhesive

[Graham_Wright]

Any recommendations please?
I have had poor results with previous purchases.

 

[wallacebob]

For upholstery use; Trimfix. I’ve used a blue spray adhesive from Toolstation, but it is messy and only good for no absorbent materials I feel, as it can stain.

 

[Lightwave395]

I've just fixed formica to the inside face of 6 new locker doors using 'Everbuild stick2' from Toolstation

Stuck like the proverbial, just make sure your surfaces are in the right postion before you press them together as it won't move or come off once it's joined (ask me how I know...)

Stick2 Contact Adhesive 500ml spray

 

[The Q]

If it's an evostick style impact adhesive, make sure it's labeled "High Temperature" as the sun can easily unstick the normal versions..

 

[Keith-i]

I saw an interesting vid on youtube about spray adhesives for lining material. It demonstrated how important it is to wait until it's gone tacky and not just spray it on and instantly offer it up. It made a big difference to how well it stuck.

 

[Graham_Wright]

I saw an interesting vid on youtube about spray adhesives for lining material. It demonstrated how important it is to wait until it's gone tacky and not just spray it on and instantly offer it up. It made a big difference to how well it stuck.

I do that. Around 2 minutes usually (unless I forget when it can be the next day!).

 

[sogood]

Not forgetting that usually both surfaces have to be sprayed. To that end, it's best to spray the more non absorbent surface first. The absorbent surface(lining) will usually dry out much quicker.

 

[Robin]

this stuff worked on our headlinings
Trim Fix 500ml High Temperature Adhesive Glue Spray for Van Lining : Amazon.co.uk: DIY & Tools

 

[owen]

I have used this an it was very good adhesive