Small piece of tube...and I mean small.

[Vara]

I need a piece of metal tube, prefer copper or brass but any metal will do.

4mm I/D. 6mm O/D. 10mm Length

I know that someone has somebody has such a bit kicking about in their shed and would post it to me for a donation to RNLI or charity of choice, and thus save me from going for a minimum purchase on t'internet which would be £45 :-(.

Or ideas which will produce seller of item at reasonable price.

 

[david_bagshaw]

I might have a bit left over from my BSS installation of the inlet pipe to my ebber. will be doing the job sat/ sun so will let you know then.

 

[Pye_End]

I have some copper gas pipe which might be the right size. PM me with your address as I will need to pop into Canterbury tomorrow morning.

 

[Vara]

I have some copper gas pipe which might be the right size. PM me with your address as I will need to pop into Canterbury tomorrow morning.

Sorry Pye end, I missed your reply, PM sent.

 

[Vara]

The forum triumphs again, many thanks to Pye-end, David Bagshaw and the anonymous donor who dumped assorted copper off cuts in my cockpit.

The problem,

The solution,

My fully fiddled table, note the tools used, this characterises my approach, absolute precision combined with brute force!

A trip to the RNLI boathouse has been made.