Sigma 362 manual

[skipperneil]

Hi Folks

Having just acquired a Sigma 362 I would like to know if there is any such thing as a manual for them and where to get hold of one?

I am in the process of fitting a storm jib and looking for a good way to attach the removable inner stay to the deck. I need a fixing for the end of the stay and some means of fitting a deck attachment.
Any ideas?

Thanks

Neil

 

[michael_w]

I'd have thought the bulkhead at the aft end of the anchor locker could be beefed up to take a chain plate. No idea on the manual.

 

[temptress]

I used to have a 362 and did exactly what you are thinking of doing. I had a tang fitted to the anchor locker bulkhead with a ring on desk.

The boats were build by Marine Projects in Plymouth and I always found them helpfull even though they had long since stopped building them. Advice on how systems were put togeather, structual assistance when I need some boatyard work. Try giving them a call.

There was a boat manual (mine went wiht the boat) but this was before the internet was common and i've never seen an electronic one. Perhaps a current 362 owner could arrange to make a copy of theirs for you.

God luck...

 

[skipperneil]

Thanks folks, I will probably to fit a chainplate at the back of the anchor locker. It seems about the best place and cetainly strong enough I would have thought.

Neil