nathanlee
Well-Known Member
When I ended the season last September, I wisely flushed the outboard in a wheelie bin.
Slightly less wisely, I chose a wheelie bin with grass cuttings in the bottom, and they managed to block stuff up.
The tell tail is spitting bits of water out, but it's not a steady trickle, so I'm worried that the engine will overheat when used properly (I intend to this weekend).
Before I set about pulling it to bits, has anybody got any helpful advice on this engine?
Slightly less wisely, I chose a wheelie bin with grass cuttings in the bottom, and they managed to block stuff up.
The tell tail is spitting bits of water out, but it's not a steady trickle, so I'm worried that the engine will overheat when used properly (I intend to this weekend).
Before I set about pulling it to bits, has anybody got any helpful advice on this engine?