squidge
New member
I would like to adjust the rake on my mast but as i have never touched anything larger than a big dinghy i am a little apprehensive about a 40ft mast.
My boat is faster on one tack that the other and i know that i should be able to point higher.This makes me suspect that the mast is two far forward and has greater tension on one side.My question is how do i check that the tension is even and not over tight as i do not want to break something.
PS its 10mm s/s cable.
/forums/images/icons/smile.gif
<hr width=100% size=1>
My boat is faster on one tack that the other and i know that i should be able to point higher.This makes me suspect that the mast is two far forward and has greater tension on one side.My question is how do i check that the tension is even and not over tight as i do not want to break something.
PS its 10mm s/s cable.
/forums/images/icons/smile.gif
<hr width=100% size=1>