Replacement Sea Cock Handle

[nigelmercier]

I need a replacement handle for one of my sea cocks, it is bent, see photos below. Can anyone identify the manufacturer, or suggest a similar item?

 

[LORDNELSON]

Would it perhaps be simpler to make a new one from a flat bar of reasonable non-corroding metal?

 

[alastair]

This looks identical to mine!!
I found a supplier for this a few weeks ago:
11-75040-3 BALL VALVE LEVER HANDLE FOR 1-75040/75050 £4.65

Phone them up and state the Lever length you need

Available from Aquafax
http://www.aquafax.co.uk/default.asp

Good Luck

 

[Bav34]

The first 3 chandlers that I tried would only sell the complete seacock and handle .... good grief!!!

Aladdins Cave clicky had one that I wanted in stock and ordered the other one for me. /forums/images/graemlins/ooo.gif

 

[charles_reed]

In your position

I'd change the seacock, which is really a cheapo brass plumbing one.

Last one I bought (I made sure it had a cast handle) was €15 from the bricolage in Argéles.

 

[Gwylan]

Based on recent experience and looking at your photo I would strongly encourage you to replace the entire sea cock. Or be very sure that what is inside the sea cock is actually capable of doing any good!

 

[nigelmercier]

Thanks for the leads, I'll check them out. There's nothing wrong with the seacock itself, but I think the handles could all do with a bit of Hammerite.