Raymarine E120 widescreen

[dj43]

Hi all my E120 widescreen has a bad screen flicker, if I reduce the brightness it reduces the flicker, ( not tried for any length of time) checked connections all seen ok,

instruction booklet, mentions perform factory reset, software mismatch upgrade required, anyone had similar experience and is there a fix

Thanks for any advice

 

[Seastoke]

Have you tried a factory reset , but if you need a software upgrade , you can pay raymarine. £80 for a card . I put my problem about my e120 on pbo forum and a forumite sent me a card I used it and sent back , just for the price of post . Ere is more people to answer your query . Good luck. Ps mine working perfect again.

 

[kashurst]

Sounds like the back light is on the way out. It is a series of cold cathode flouresent tubes powered from a high voltage converter inside the E120.
I believe it is no longer possibe to get parts. However a few people on here replaced the tubes with led strips which works well in the E120.

 

[[164147]]

It isn't an E120 but an E120w which doesn't use CCFTs. The unit is failing and a factory reset or software upgrade isn't going to help. You would need a replacement screen or power module from another unit to repair it.

 

[dj43]

Thanks for the reply’s, I am not back on board for a while, next visit, will take it out and see if the service centre can have a look at it