quick water boiler

[sailaboutvic]

The pressure release valve is leaking and there no marking what the bar pressure of the valve ,.
Manual says max working pressure KPa 600 which is about 6bar .
Any suggestion for a suitable valve .
I asked the dealers but none have any information that will help .
Thanks

 

[Yngmar]

Ours was a 4 bar one. I replaced it with this one in 2019: 1/2" MALE X FEMALE PRESSURE RELIEF VALVE 4BAR | eBay

Can probably find faster at the local plumbing supplier. Just make sure it's got the right thread.

 

[michael_w]

3 bar is the norm on unvented hot water cylinders and sealed boilers.

 

[sailaboutvic]

Cheers guys look like I can get my hands on one now

Thanks everyone

 

[westhinder]

3 bar is the norm on unvented hot water cylinders and sealed boilers.

That’s what I used when I had to replace mine

 

[sailaboutvic]

18 euros but it's the same as on the boiler .